4707 Northeast Minnehaha Street, Vancouver, Washington 98661, United States
TAMIYA EURO TRUCK RULES
Tamiya Euro Truck (BOX STOCK)
This class is run with similar rules to the Tamiya Championship Series. The spirit of this class is to be a fun, truly “build it and run”, low-cost, box stock class
- Tamiya TT-01 based Euro Semi Truck kits only. The kit must be built EXACTLY as shown in the manual.
- Must use kit supplied motor and ESC. The original motor bullet connectors must be used and the wires may not be shortened. The battery connector may be replaced with a Dean’s style connector.
- Reverse must be disabled in the ESC.
- Only upgrade allowed is ball bearings.
- No modifications to the chassis or any other kit parts are allowed.
- All kit screws must be used. Screws may not be omitted to change the handling of the truck.
- You must run all the kit parts including (but not limited to) the servo saver, springs, steering links, etc. Again, this is a box stock, fun, low cost class. Bearings are the ONLY upgrade allowed!.
- Racers may use grease in the differentials. However, grease must not leak out of vehicle. Differentials must work and cannot be “locked” mechanically or with putty or similar materials.
- Must use kit supplied pinion and spur gears.
- Must use kit supplied tires and wheels. Foam or other tire inserts are not allowed.
- Tires may be glued on the sidewalls ONLY.
- The full body must be used. Body may not be modified to lower center-of-gravity or reduce weight. (including the “Fat Fox”)
- Adding FOAM material to the kit foam bumper is allowed.
- 2S LiPo hardcase battery. Max capacity of 6,000mAh. OR NIMH Battery) Chassis may not be modified to fit the battery. Kit supplied battery strap must be used.
- Max voltage of 8.40V.
- SXT traction compound may be used. SXT is the only brand of compound allowed
- Any servo and receiver may be used.
- And last but not least have fun!